Descrizione
Specifications Swit pantograph with precise positioning for studio lights0.6-3m extension is an aerial support system that offers precise control over the positioning and orientation of studio lights. It helps videographers achieve their desired lighting effects by allowing them to easily adjust the height, angle and distance of the light source from the subject. The expansion length is 0.6 m3 m. The Swit GA-PT30P pantograph allows the balance to be adjusted in 7 steps to suit different luminaire weights. Maximum load 23 kg. On the back side of the pantograph, you can attach the lights power cable or DMX cables to each section; when the light moves up and down, the cables will be well organised, stretching along with the pantograph.
The GA-PT30P allows precise positioning at any desired height, from 0.6 m to 3 m, and the pulling force can be easily adjusted by the knobs on either side of the top box. It can be easily attached to the ceiling hook using screws. SWIT supplies the GA-DG75 hook (optional and not included) which matches the pantograph perfectly. At the lower end of the pantograph, SWIT supplies a bolt and nut. This can be conveniently attached to the fork of the studio lamps.
* Please remove the baby pin socket on the SWIT light fork, then install the pantograph.
| Weight | 3,8 kg |
| Extension | 0,63 m |
| Spring thickness | 0,73 mm |
| Spring width | 22 mm |
| Payload | 23 kg |
| Color | Black |
| Material | Aluminium alloy |
