Kupo CT-20MK C-stand with 2 risers and 3 sections with grip head and arm Pagamento Sicuro

Descrizione

Specifications

Kupo CT-20MK C-stand with 2 risers and 3 sections with grip head and arm has two spring-loaded legs that open to fixed positions, while the third leg is height-adjustable by loosening a locking knob and sliding it up and down on the main mast section. This allows the user to raise one leg higher than the others to level the stand on a slope or uneven ground.

The kit comes with a 20 C-stand, a 2.5 gripping head, and a 20 gripping arm. The 20 socket arm with hex pin is a 2-1/2 socket head mounted on the end of a 20 piece of 5/8 (16 mm) diameter steel pipe and finished with a faceted hex pin to hold lighting fixtures in place when placed on the end of the arm.

The surface of the tube has been carefully machined to create a rough texture suitable for providing a non-slip surface. The 2-1/2 gripping head consists of a pair of rotating aluminum discs connected to a 5/8 (16 mm) receiver. The discs have four V-shaped jaws of different sizes to accept any 5/8, 1/2, 3/8 or 1/4 mounting pin or tube accessory.

The V-shaped grippers have teeth that firmly grip anything mounted between the plates. The 2-1/2 gripping head features an oversized ergonomic T-handle and dedicated roller bearings designed for maximum torque.