In offerta!

Acquista Ora Dayton Audio Ultimax UM15-22 Subwoofer

Il prezzo originale era: 369,95 €.Il prezzo attuale è: 147,98 €.

Pagamenti sicuri Carta, PayPal e checkout protetto
Spedizione gratuita da 58,00 € Consegna rapida in tutta Italia
Supporto rapido Assistenza su ordini e spedizioni
COD: SK0005007 Categoria: Tag:

Descrizione

Descrizione del prodotto

Descrizione del prodotto Dayton Audio Ultimax UM15-22 SubwooferPlease note that the Dayton Audio UM15-22 has been replaced with the Dayton Audio UMII15-22 Dayton Audio's Ultimax Series DVC subwoofers are purpose-built to move air and create clean, articulate, fast bass. Experience the apex of subwoofer design.

Highlights

  • Sweeps massive amounts of air!
  • Over 1-1/2" of total cone travel
  • 800 watts RMS power handling
  • The latest in subwoofer technology
  • Dual linear stiffness spiders limit distortion and rocking modes
  • Dual 2 ohm, 2-layer copper voice coils
  • Large vented pole piece and under-spider venting

Product details

Dayton Audio UM15-22 15" Ultimax DVC Subwoofer 2 ohms Per Coil

If you want outrageous amounts of bass, you gotta move some air

The Ultimax Series of dual voice coil subwoofers, from Dayton Audio, are not for the faint of heart. Built using the latest in subwoofer technology, Ultimax subwoofers are the pinnacle of low frequency driver design. An Ultimax subwoofer tests the strength of your foundation with fast, articulate, gut-wrenching bass.

The versatility you need for mobile, home, or pro subwoofer excellence

Dual 2 ohm voice coils allow for stereo 2 ohm and mono 1 ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a benign 4 ohm load for greater amplifier compatibility.

Built to produce massive low frequency output and keep on doing it

To improve power handling, increase thermal management, and reduce power compression, Dayton Audio designed the Ultimax Series with large black anodized formers and vented pole pieces, under-spider ventilation, and two-layer copper voice coils.

Over 1-1/2" of travel (3/4" Xmax) is kept completely linear through the use of dual spiders that also limit distortion and rocking modes. "Tall-boy" rubber surrounds with integrated gaskets maintain driver surface area during extreme excursion moments. Thick, one-piece Nomex honeycomb covered cones are covered with woven, heavy-duty glass fibers creating ultra-still cones that resist deformation.

A strong motor takes you to wherever you want to be

A large copper sleeve and copper pole cap in the motor reduce energy storage from inductance, with the side benefit of lowering distortion for "faster" response. Large dual-stacked, high-energy magnets handle the heavy lifting and bring Qts down to a level where Ultimax subwoofers can be used in vented or sealed cabinets and enclosures.

Cabinet recommendations:

  • Sealed: 3.8 cubic ft. (net internal, not including driver volume) with 3 lbs. of Acousta-Stuf polyfill produces an f3 of 34 Hz with a 0.83 Qtc alignment
  • Vented: 4.5 cubic ft. (net internal, not including driver or port volume) produces an f3 of 24 Hz. Larger cabinets and lower tuning frequencies are possible.

Note: All parameters derived with voice coils wired in series.

Show more

Mostra meno

Specifiche

Numero dell'articolo:

UM15-22
EAN

0844632099267
Serie del woofer :Dayton Audio Ultimax series
Tipo di woofer :Subwoofer
Gestione della potenza (RMS) :800 Watts
Gestione della potenza (max) :1,600 watts
Impedenza (Z) :4 ohms
Sensibilità (SPL a 1m / 2,83V) :86.5 dB
Risposta in frequenza :15 - 1,000 Hz
Diametro della bobina mobile :63.5 mm
Resistenza DC (Re) :3.7
Induttanza della bobina mobile (Le) :0.8mH
Frequenza di risonanza (Fs) :28.4 Hz
Fattore di merito meccanico (Qms) :2.8
Fattore di merito elettromagnetico (Qes) :0.95
Fattore di merito totale (Qts) :0.71
Massa del diaframma incl. la massa dell'aria (Mms) :287g
Cedevolezza meccanica della sospensione (Cms) :0.11mm/N
Superficie del cono (Sd) :814.6cm²
Volume di spostamento (Vd) :1,548 cm³
Prodotto BL (BL) :14.1T·m
Volume equivalente di cedevolezza (Vas) :101.94 liters
Escursione lineare massima (Xmax) :19mm
Materiale del cono / diaframma :Nomex Cone
Materiale della sospensione :Rubber
Materiale del filo della bobina mobile :Copper
Supporto della bobina mobile :Aluminum
Bobina mobile doppia :Yes
Materiale del cestello / telaio :Cast Aluminum
Materiale del magnete :Ferrite
Diametro esterno complessivo :388 mm
Profondità complessiva :226 mm
Diametro del ritaglio del pannello frontale :350 mm
Diametro del cerchio dei fori di montaggio :14.76
# Numero di fori di montaggio :8
Volume per cassa sigillata :3.1 cubic ft. (net internal) with 3 lbs. of Acousta-Stuf polyfill
Frequenza di risonanza della cassa sigillata (F3) :35 Hz with a 0.707 Qtc alignment
Volume per cassa reflex :6.0 cubic ft. (net internal, not including driver or port volume) with 6 lbs. of Acousta-Stuf tuned to 18 Hz with two 4" diameter by 26" long flared ports
Frequenza di risonanza della cassa reflex (F3) :22 Hz. Larger cabinets and lower tuning frequencies are possible.

Show more

Mostra meno